Residential Anchor Points

Temper Reusable Anchor
(00455)

Temper reusable anchor point

Temper Reusable Anchor - Swivel Top (00458)

Temper reusable anchor point with swivel top

Stainless Steel Reusable Anchor (00470)

Stainless steel reusbale anchor point

Temper Reusable Anchor

  • Meets all applicable OSH & AS/NZS standards
  • Reusable
  • Cost effective
  • Can be installed with screws or duplex nails
  • For temporary use on wood rooftops
  • Fasteners provided
  • Fits up to 45 Degrees roof pitch
  • Offset holes down the center to avoid truss splitting
  • Can be used between 2 trusses when all holes are filled
  • Thicker plated metal for longer lasting life of the product
  • Approved for use in metal deck 20g or better. Please contact Customer Service for fastener specifications.

Stainless Steel Reusable Anchor

  • For temporary use on wood rooftops
  • Fits any roof pitch
  • Meets all applicable OSH & AS/NZS standards
  • Stainless steel is durable and reusable
  • Easy installation
  • Fasteners provided
Part# Description Pitch Weight kg
00455 Temper Reusable Anchor Any 1.5
00458 Temper Reusable Anchor with Swivel Top Any 1.8
00470 Stainless Steel Reusable Anchor Any .2

SP-Anchor
(00460)

SP-Anchor
  • Fits any pitch
  • Disposable
  • Easy to install by nailing or screwing into the truss
  • Screws are included
  • Meets all applicable OSH & AS/NZS standards
  • Durable galvanized steel

WA-Anchor
(00480)

WA-Anchor
  • Can be left in place or removed from service after construction is complete
  • Attaches by drilling through the top chord & securing to the wall plate using four (4) 16d sinkers
  • Provides safe vertical anchorage access when performing siding/external wall constructions
  • Cost effective and versatile
  • Attaches to 2 x 4 & 2 x 6 top plates
  • Supplied with all necessary fasteners
  • Used as fall arrest or fall restraint

Halo Anchor (00482)

Halo Anchor point
  • Reusable thick steel roof anchor
  • Complete with zinc plated forged alloy steel O-ring
  • Nail or bolt into the roof member
  • Removable, it may be used again after an inspection
  • 2268KG minimum breaking strength
  • Supplied with all necessary fasteners
  • Used as fall arrest or fall restraint
  • May also be used in conjunction with temporary Rope HLL
  • Fasteners not included
Part# Description Pitch Weight kg
00460 SP-Anchor Any 1
00480 WA-Anchor (fasteners included) 30 .3
00481 WA-Anchor (fasteners included) 30 - 45 .5
00482 Halo Anchor (fasteners included) Any .3

Ridge-It Anchors

Ridge-It Anchors
  • For permanent use on wood rooftops
  • Discreet design
  • Stainless steel anchor
  • Easy installation
  • Meets all applicable OSH & AS/NZS standards

Snappy Disposable Anchors

Snappy Disposable Anchors
  • Fits any roof pitch
  • Easy to install by nailing into the truss
  • Just hammer over the attachment point when the job is done & install roofing substrate over destroyed anchor point
  • Fasteners provided
  • Sold in cartons of 8 or 25
  • Meets all applicable OSH & AS/NZS standards

Ridge-It SAFU Anchor

The new Ridge-It SAFU Anchor now comes with butyl as extra water tight protection. Butyl is a copolymer of isobutene and isoprene, used as a waterproofing material.

In addition, we are also adding spiral stainless steel fasteners with all anchors.

Part# Length Description Application Weight kg
00500 250mm Ridge-It Anchor – 1 D-ring Wood .3
00510 450mm Ridge-It Anchor – 2 D-rings Wood .4
00511 460mm Ridge-It SAFU Anchor – 2 D-rings Wood .4
00515 460mm Ridge-It Tile Anchor – 1 D-ring Wood 1.30
00710 Snappy Disposable Anchor – Carton of 25 Wood 11
00711 Snappy Disposable Anchor – Carton of 8 Wood 3.5

Product Categories